Envello
IP blocklist

Spamhaus PBL: how to check and get delisted

The Spamhaus PBL lists IP ranges that should not send email directly to other mail servers, such as home broadband. A listing is policy, not a verdict on you.

Operator
The Spamhaus Project
Keyed by
IP address
DNS zone
zen.spamhaus.org
Envello monitoring
Through Spamhaus ZEN, when your sending subdomain has an IP

What gets you listed

  • Your IP sits in a range that its network owner, or Spamhaus in the owner's absence, says should not deliver unauthenticated email straight to other mail servers.
  • Spamhaus says the IPs on the PBL are not necessarily bad. They should never be sending email directly.
  • The PBL lists dynamic and static IPs. Many are ranges an ISP assigns to broadband or dial-up customers.
  • Spamhaus says PBL listings do not block email from a mail program that authenticates with the ISP's or company's mail server. A sudden problem often means SMTP authentication got switched off or fails.

How to check

  • Query the IP against ZEN (command below) and look for 127.0.0.10 or 127.0.0.11.
  • 127.0.0.10 means an ISP maintains the entry. 127.0.0.11 means Spamhaus maintains it.
  • The Spamhaus IP and Domain Reputation Checker shows the listing and is where PBL removals are handled.
dig +short 10.113.0.203.zen.spamhaus.org

Operator lookup: https://check.spamhaus.org/

Who can query it

  • Spamhaus says its public DNS mirrors are free for non-commercial use by small and medium organisations. You must query from a recursive resolver you run on your own network, or from a public resolver that supports ECS.
  • Spamhaus documents answers in 127.255.255.0/24 as errors, not listings. If you see one from a shared resolver, you have not been told whether the IP is listed.
  • As a workaround for the resolver rule, Spamhaus points to a free Datafeed Query Key from Spamhaus Technology.

How to get delisted

  • If you send from a mail program, you usually do not need a removal. Turn on SMTP authentication and submit through your provider's mail server on port 587 or 465, not port 25. Spamhaus says this fixes the problem immediately.
  • If you run your own mail server, Spamhaus allows a single-IP removal in the Reputation Checker (open the details and follow the removal steps). It allows about 15 minutes for DNS propagation.
  • Spamhaus says only IPs that meet all of these should be removed: static, an outbound mail server, set up with forward and reverse DNS, and assigned to the person or company doing the removal. Port 25 outbound should be closed for every other device.
  • Spamhaus does not process removal requests from free email addresses such as Gmail or Hotmail. Use an address on the mail server's own domain.
  • Spamhaus says end-user exclusions expire after one year and are reversed at once if spam is detected from the IP. Network owners with a PBL account can set shorter expiry or disallow removals in their ranges.
  • To remove many IPs, Spamhaus says the ISP that holds the range should make the request.

Return codes

CodeMeaning
127.0.0.10PBL, entry maintained by an ISP
127.0.0.11PBL, entry maintained by Spamhaus

Sources

Last checked 14 November 2026. Operators change their rules, so confirm on the operator's site before you act.

Blocklist monitoring

Spamhaus PBL is part of Spamhaus ZEN. When your sending subdomain resolves to an IP address, Envello checks that IP against Spamhaus ZEN and alerts you when it gets listed.

How blocklist monitoring works

Get the full Deliverability Debugging Checklist

← All email blocklists